|Home||» Products||» EXAIR Pneumatic Products||» Spot Cooling Products|
Spot Cooling Products
What Is a Vortex Tube?
- Temperatures from -50° to +260°F (-46° to +127°C)
- Flow rates from 2 to 150 SCFM (28 to 4,248 SLPM)
- Refrigeration up to 10,200 Btu/hr. (2,571 Kcal/hr.)
Temperatures, flows and refrigeration are adjustable over a wide range using the control valve on the hot end exhaust.
Why EXAIR Vortex Tubes?
EXAIR Vortex Tubes are constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures that EXAIR Vortex Tubes will provide years of reliable, maintenance-free operation.
COLD GUN AIRCOOLANT SYSTEMS
- Tool sharpening
- Drill and cutter grinding
- Plunge and form grinding
- Surface grinding
- Tire grinding
- Band sawing
- Plastic machining
Cold air eliminates heat cracking of carbide and tool edge burning during grinding and sharpening operations. Increased tool life between regrinds is the result.
Milling and Drilling
Fly cutters up to 460mm in diameter have been cooled with the Cold Gun. Dissipating heat with cold air extends tool life, increases speeds and feeds, and improves finishes.
Cooling a roll with 20°F (-7°C) air keeps the material on the surface from bunching up, jamming or tearing. The metal surface transfers the cold temperature to the product.
Cold air cools a laser cut part so it can be handled seconds later. The High Power Cold Gun has twice the cooling capacity of the standard Cold Gun, cooling the part in less time.